For commercial and industrial application where large volume of air is required at moderate to high pressure. Volume coefficient ranged from 0.3 to 0.6 and pressure coefficient ranged from 0.2 to 0.6. Specially designed integral straightening vanes reduce turbulence and provide high efficiency and low sound level.

Both air and sound performance ratings are tested and certified by AMCA, in accordance to AMCA210 and AMCA300 Standards.

High temperature (up to 400°C/2 Hours) in accordance with EN12101-3 certification by TÜV SÜD a third party globally renowned testing and certification organisation.

All impellers are statically and dynamically balanced to ISO1940 and AMCA204 - G2.5 Standards.

Overview

• For commercial and industrial application where large volume of air is required at moderate to high pressure. Volume coefficient ranged from 0.3 to 0.6 and pressure coefficient ranged from 0.2 to 0.6. Specially designed integral straightening vanes reduce turbulence and provide high efficiency and low sound level.
• Both air and sound performance ratings are tested and certified by AMCA, in accordance to AMCA210 and AMCA300 Standards.
• High temperature (up to 400°C/2 Hours) in accordance with EN12101-3 certification by TÜV SÜD a third party globally renowned testing and certification organisation.
• All impellers are statically and dynamically balanced to ISO1940 and AMCA204 - G2.5 Standards.

Quick Facts

• Size from 450 to 2000
• Capacity up to 450,000 m3/h
• Static pressure up to 2,300 Pa
• Suitable for clean air normal ventilation and smokespill application.

Operating Temperature

• Normal Ventilation: -20°C to +55°C
• High Temperature Application: available up to 400°C/2Hrs.

Motor

Totally enclosed Class ′F′ or ′H′, with a minimum IP55 protection are fitted as standard. Standard motor up to 2.2kW are supplied with DOL starting, motor 3.0kW and above are with star/delta starting. Motor of other specifications are available upon request.

Accessories

• Inlet and outlet duct connection flanges to connect circular duct to TDC flanges.
• Circular flexible duct connectors, both standard and high temperature variations (up to 400°C).
• Inlet and outlet safety guards.
• Vibration isolator mounts for floor or ceiling mounted installations.
• A drain coupling can be attached to the bottom of housing.

Construction

Double flanged casing is produced in mild steel or galvanized steel. The impeller blades are made of Aluminium alloy.

Coatings

Zinc rich primer and polyester powder coating or galvanized finishing are available for all mild steel parts.